| 
| Hand
Spined & Weight Matched
Sitka Spruce Wood Shafting |
|
Hand
Spined & Weight Matched SITKA SPRUCE Wood Shafting -
Simply, the best wood shafting available! 11/32” diameter,
very straight grain and extremely tough, about the same or slightly
heavier than POC and not burnished so they take stains very
well. Hand spined and grain weight matched to +/- 2.5# of spine
and +/- 5 grains weight or less. Each shaft is marked with its
actual spine and grain weight. Please note these shafts are
31” long so will make a 30” BOP maximum arrow length.
Sold Per Dozen.
Spines available: 45-49, 50-54, 55-59, 60-64, 65-69, 70-74,
75-79 & 80-84 |
| Parallel
shafting |
$24.00
per Dozen |
Parallel
shafting cut to length w/point and nock tapers. Includes
hand straightening. |
$28.00
per Dozen |
| Tapered
shaft has a 10" taper to 5/16"on nock end
and nock taper. Includes hand straightening. Also cut to length
with point taper. |
$32.00
per Dozen |
Barrel
Tapered shaft has a 10" taper to 5/16"on
nock and point end . Also cut to length with nock and point
taper. Includes hand straightening. |
$39.00
per Dozen |
| Stain
& Seal Option for Wood Shafting, one or two color |
Add
$14.00 per dz. |
| Hand
Spined & Weight Matched
Douglas Fir Wood Shafting |
|
Hand
Spined & Weight Matched DOUGLAS FIR Wood Shafting -
Now available! 11/32” diameter, very straight grain and
extremely tough. Slightly heavier than the Sitka Spuce shafting.
Hand spined and grain weight matched to +/- 2.5# of spine and
+/- 5 grains weight or less. Each shaft is marked with its actual
spine and grain weight. Please note these shafts are 31”
long so will make a 30” BOP maximum arrow length. Sold
Per Dozen.
Spines available: 45-49, 50-54, 55-59, 60-64, 65-69, 70-74,
75-79 & 80-84 |
| Parallel
shafting |
$26.00
per Dozen |
Parallel
shafting cut to length w/point and nock tapers. Includes
hand straightening. |
$30.00
per Dozen |
| Tapered
shaft has a 10" taper to 5/16"on nock end
and nock taper. Includes hand straightening. Also cut to length
with point taper. |
$34.00
per Dozen |
Barrel
Tapered shaft has a 10" taper to 5/16"on
nock and point end . Also cut to length with nock and point
taper. Includes hand straightening. |
$41.00
per Dozen |
| Stain
& Seal Option for Wood Shafting, one or two color |
Add
$14.00 per dz. |
| BLACKHAWK
VAPOR CARBONWOODS SHAFTING |
| |
| BLACKHAWK
VAPOR “CARBONWOODS” carbon shafting –
These carbon shafts have a very nice wood grain finish, +/-
.003 straightness and +/- 2.5 grains weight tolerances. Finished
arrow weight, with 100 grain steel adapters, is in the 560-580
grain weight range, depending upon length. No other added weight
is necessary. 3000 are 8.5 grains per inch and for bows 50-55#,
4000 are 9.5 grains per inch and for bows 50-60#, and 5000 are
9.8 grains per inch and for bows 60# and up. Price includes
tunable nock and screw-in inserts. Extra
nocks are $4.50 per dz. Extra inserts
are $4.50 per dz. |
Price
Each - $8.00 |
Price
per 1/2 Dozen - $42.00 |
Price
Per Dozen - $78.00
Cut to Length - Add $3.00
Inserts Installed - Add $3.00 |
| EASTON
XX-75 SHAFTING |
| |
| EASTON
XX-75 shafting-- Legacy shafts are wood grained/footed
finish and available in 1916, 2016, 2018, 2020, 2117, 2216,
& 2219. Green Gamegetter’s are green anodized finish
and available in 2117, 2216 & 2219. Look at Spine Chart
page for relative spine readings of various aluminum shafting.
Screw-in inserts are included. |
LEGACY
SHAFTING |
Price
Each - $5.00 |
Price
per 1/2 Dozen - $30.00 |
Price
Per Dozen - $54.00
Cut to Length - Add $3.00
Inserts Installed - Add $3.00 |
| GREEN
GAMEGETTER SHAFTING |
Price
Each - $4.00 |
Price
per 1/2 Dozen - $22.00 |
Price
Per Dozen - $38.00
Cut to Length - Add $3.00
Inserts Installed - Add $3.00 |
| GORDON
FIBERGLASS SHAFTING |
| |
| GORDON
FIBERGLASS shafting--These are old stock, but new and
is excellent shafting. Very durable and always stays straight.
Good mass weight for a great hunting shaft. 2 sizes are available.
Size 5/E(42# spine) 10 grains per inch & 6/F(47# spine)
10.2 grains per inch, are available in tan or orange color.
These make great kid's/women's arrows. Spine may vary +/- 2.5#.
Nock & point inserts are included. Please specify target
points, screw-in or glue-in broadhead adapter point inserts.
Install inserts with 5-minute epoxy or a gel-type super glue
like Kwik-It. Use Bond-Tite for nocks and fletching.
|
Either
Size 5 or 6 - Price Per Dozen- $20.00
Cut to Length - Add $3.00
Inserts Installed - Add $3.00 |
|
|
